Add New Wwn Dialog Box (Fibre Channel) - HP StorageWorks XP128 User Manual

Lun configuration and security manager xp

Hide thumbs Also See for StorageWorks XP128:

Table of Contents

If the desired host has never been connected via a cable to another port in the disk array, skip to

step

In the Port list on the upper right corner of the WWN table (Fibre Channel) or the iSCSI name table

(iSCSI environment), select the port to which the desired host is connected.

Select the desired host bus adapter from the WWN (or iSCSI Name) table.

Select a host group from the tree and click the Add WWN (or Add iSCSI Name) button. The Add New

WWN (Fibre Channel) or Add New iSCSI Name (iSCSI) dialog box appears.

Figure 15

Add New WWN dialog box (Fibre Channel)

Figure 16

Add New iSCSI Name dialog box (iSCSI)

To assign a nickname to the host bus adapter, enter the nickname in the Nickname box and click OK.

NOTE:

If two or more host bus adapters are selected, the Add New WWN (or Add New iSCSI)

dialog box displays repeatedly to let you assign a nickname to each selected HBA (see

and

Figure

18). If you do not need to assign nicknames to HBAs, enable the The remaining WWNs

(iSCSI Names) do not need names check box and click OK. If you select this option, the Add New

WWN (Add New iSCSI Name) dialog box will not prompt you for additional nicknames.

Figure 17

Add New WWN dialog box (when registering a host that has previously been connected to the

disk array)

LUN Configuration and Security Manager XP user guide for the XP128/XP1024

Figure 17

Table of Contents

Storageworks xp1024