Configuring Your Reader - Baracoda TagRunners User Manual

Configuring your reader

To configure your reader, you can use the BaracodaManager software (v3.35 min). When connected to a host
device, the BaracodaManager software can be used for multiple setting changes.
Reset your reader
To reset the reader to its "default settings", please use BaracodaManager software (v3.35 min).
Security
The Bluetooth connection is secured with a PIN code authentication.
You can configure security (enable/disable/change PIN code) through BaracodaManager software (v3.35 min).
The Security is enabling by default: default PIN code is 0000.
RFID Protocols list
You can enable/disable any type of RFID protocols supported by the reader with the BaracodaManager
software (v3.35 min).
RFID Protocols supported
Protocols
Mifare 'classic' 1K / 4K
Mifare Ultralight
ISO/IEC 14443- A
Mifare DESFire
Mifare Pro, ProX, SmartMX
ISO/IEC 14443- B Atmel Crypto RF
ASK CTS256B & CTS512B
S.T. MicroElectronics SR
Inside Contactless PicoTag
NXP ICODE-1
ISO /IEC 15693-3 KSW Microtec 'VarioSens'
NXP ICODE SLI
ISO /IEC 15693 S.T. MicroElectronics LRI64
TI Tag-it HF
Baracoda TagRunners – User Guide v1.6
Read Tag Id
Examples
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Data Capture
for Workforce
TagRunners
Read / Write data memory
Yes
Yes
No
No
Yes
No
No
No
No
Yes
Yes
Yes
Yes
in Motion
- 9 -