Introduction - Baracoda TagRunners User Manual

Introduction

The TagRunners is a contact RFID Reader / Encoder very easy to use. Just press the trigger in order to switch on
the reader and simply press it again to read a RFID Tag. The colours of the LEDs indicate the status of the
device. A beep indicates when the reader connects to the remote device and when a Tag is readed successfully.
Acknowledgement of a completed read is configurable by the user.
Tags data are transmitted in Real Time to the remote host devices/terminals using Bluetooth wireless
technology or Tags data can be stored in the reader and later uploaded to a remote device/terminal using
Bluetooth wireless technology. You can download software updates as well as additional documentation from
http://www.baracoda.com after registration.
Note:
What is the Reading technology used by the TagRunners?
This product supports the RFID HF 13,56MHz. Please consult the Compatibility Protocols list included in this
document to know the RFID protocols supported.
Baracoda TagRunners – User Guide v1.6
Data Capture
for Workforce
in Motion
- 4 -