T He Different Connection Methods - Baracoda TagRunners User Manual

The different connection methods
The only way to create a connection from a Host and a reader is the Slave mode. The Host (PC,
BaracodaManager, ...) creates the connection onto the scanner.
The MASTER mode is not available for this product.
The different reading modes
TagRunners has three (3) reading modes. These modes can be changed with the BaracodaManager software
(v3.35 min).
Trigger mode (default setting)
Simply press the trigger when you want to read a RFID Tag.
Autoscan mode
This mode enables to read continuously. In Autoscan mode, the RFID antenna is continuously on.
Smart Autoscan mode
For a battery power consumption optimisation issue, in this mode the RFID antenna is not always activated,
and the TagRunners reads by intermitent.
Option: TagRunners allows to activate the option "No duplicate scans" order to not scan twice in the same
RFID Tag. By default, this option is disabled, but can be changed with the BaracodaManager software (v3.35
min).
Baracoda TagRunners – User Guide v1.6
Data Capture
for Workforce
in Motion
- 14 -