Data format
The data format is the following: Header + Timestamp + Prefix + Data + Suffix
Header
Baracoda Header
It is a proprietary data encapsulation. It is necessary to activate the Baracoda header in 2 cases:
•
to use the Baracoda keyboard emulation (Kemul) and Terminal.
•
to use the "No data loss" mode.
You can configure Baracoda Header through BaracodaManager software (v3.35 min).
The Baracoda header is enabled in default settings.
Timestamp
Timestamp can be configured (ON/OFF, synchronise new time) with the BaracodaManager software (v3.35
min).
Timestamp will be in the following format: YYMMDDhhmmss:
YY: YEAR
MM: MONTH
Data Prefix / Suffix
A prefix and/ or suffix can be added to every data sent to the host device. You can configure prefix/suffix
through BaracodaManager software (v3.35 min).
There is no prefix/suffix in default settings.
Baracoda TagRunners – User Guide v1.6
Timestamp
Data Prefix
DD: DAY
hh: Hours
Data
Data Suffix
mm: Minutes
ss: Seconds
Data Capture
for Workforce
in Motion
- 10 -