Baracoda TagRunners User Manual page 6

BCL LED:
Single Blinks (e.g. *pause*pause*...)
Double fast Blinks (e.g. **pause**pause**...)
The led colour is Green
The Led Colour is Orange
The Led Colour is blinking Orange/Green
RSL LED:
One Single long Blink (green colour)
One Single long Blink (orange colour)
The Led Colour is blinking Orange
The Led Colour is Orange (solid)
Double fast Blinks Red
One Single long Blink Red + Green (solid)
Green (solid)
Special cases:
Both LEDs blinks orange
Baracoda TagRunners – User Guide v1.6
The reader is ready to be connected
The reader is connected
The reader is set in Real Time mode
The reader is set in Batch mode
The reader is set in Batch mode, but no data is stored in
the memory
The reader has just read and decoded a Tag
You pressed the Trigger button, and the reader is trying to
read a Tag (Trigger mode)
The reader is trying to read a Tag (Smart Autoscan mode)
The reader is trying to read a Tag (Autoscan mode) or the
reader is trying to read / write the TAG Memory.
Battery level is low. Please recharge the battery
immediately
The reader is charging
The reader is fully charged
The reader is set in the "Real Time with No Data Loss
mode" but with no bufferisation (buffer configured to 0)
and is not connected. In this particular situation the RFID
antenna is disabled: impossible to read Tags in this mode.
Data Capture
for Workforce
in Motion
- 6 -