Mitsubishi Electric EHSE-YM9EC Service Manual page 74

Engineers Forms (2/2)
Commissioning/Field settings record sheet (continued from the previous page)
Main remote controller screen
Service menu Pump speed
Heat source setting
Operation
settings
Energy
monitor
settings
External in-
put settings
6 ON: the function is active; OFF: the function is inactive.
*
7
* When DIP SW1-1 is set to OFF "WITHOUT Boiler" or SW2-6 is set to OFF "WITHOUT Mixing tank", neither Boiler nor Hybrid can be selected.
8
* Valid only when operating in Room temp. control mode.
9 "*" of "*/kWh" represents currency unit (e.g. € or £ or the like)
*
10
* Valid only when operating in Heating room temperature.
11
* If asterisk (**) is chosen freeze stat function is deactivated. (i.e. primary water freeze risk)
12 Cooling mode settings are available for ERS * model only.
*
13 Only available if DHW tank present in system.
*
14
* The settings related to Zone2 can be switched only when 2-zone temperature control or 2-zone valve ON/OFF control is active.
15
Please change setting as follows: 180 W for Speed 5, 172 W for Speed 4, 113 W for speed 3, 70 W for Speed 2 and 38 W for Speed 1.
*
16 When DIP SW5-2 is set to OFF, the function is active.
*
OCH590B
8
Heating operation Flow temp.range
*
Room temp.control
16
*
Heat pump thermo
diff.adjust
11
Freeze stat function *
Simultaneous operation (DHW/Heating)
Cold weather function
Boiler operation
Floor dry up function
Electric heater Booster heater 1
capacity capacity
Booster heater 2
capacity
Immersion heater
capacity
Delivered energy adjustment
Water pump input Pump 1
Pump 2
Pump 3
Electric energy meter
Heat meter
Demand control (IN4)
Outdoor thermostat (IN5)
Parameters
Pump speed (1–5)
Standard/Heater/Boiler/Hybrid
10
Min.temp. (25–45°C)
*
Max.temp. (35–60°C)
Mode (Normal/Fast)
Interval (10–60 min)
6
ON/OFF *
Lower limit (−9–−1°C)
Upper limit (+3–+5°C)
Outdoor ambient temp. (3–20°C) / **
ON/OFF 6
*
Outdoor ambient temp. (−30–+10°C)
6
ON/OFF
*
Outdoor ambient temp. (−30–−10°C)
Hybrid settings Outdoor ambient temp.
(−30–+10°C)
Priority mode
(Ambient/Cost/CO
Intelligent set- Energy Electricity
tings price 9 (0.001–999 */kWh)
*
Boiler
(0.001–999 */kWh)
CO Electricity
2
emis- (0.001–999 kg−CO2/kWh)
sion
Boiler
(0.001–999 kg−CO2/kWh)
Heat Heat pump capacity
source (1–40 kW)
Boiler efficiency
(25–150%)
Booster heater 1
capacity
(0–30 kW)
Booster heater 2
capacity
(0–30 kW)
ON/OFF 6
*
Target temp. Start&Finish (25–60°C)
Max. temp. (25–60°C)
Max. temp. period
(1–20 days)
Flow temp. Temp. increase step (+1–+10°C) +5°C
(Increase)
Increase interval (1–7 days)
Flow temp. Temp. decrease step (−1–−10°C)
(Decrease)
Decrease interval (1–7 days) 2 days
0–30 kW
0–30 kW
0–30 kW
−50–+50%
0–200 W
0–200 W
0–200 W
0.1/1/10/100/1000 pulse/kWh
0.1/1/10/100/1000 pulse/kWh
Heat source OFF/Boiler operation
Heater operation/Boiler operation
74
Default Field
setting setting
5
7
* Standard
30°C
50°C
Normal
10 min
ON
−5°C
5°C
5°C
OFF
4 −15°C
*
OFF
4 −15°C
*
−15°C
4
*
Ambient
2)
0.5 */kWh
0.5 */kWh
0.5 kg−CO2/kWh
0.5 kg−CO2/kWh
11.2 kW
80%
2 kW
4 kW
OFF
30°C
45°C
5 days
2 days
−5°C
3 kW
6 kW
0 kW
0%
15 )
*** ( *
0 W
0 W
1 pulse/kWh
1 pulse/kWh
Boiler
operation
Boiler
operation
Notes