How To Remove The Drain Pan (Ers Series) - Mitsubishi Electric EHSE-YM9EC Service Manual

DISASSEMBLY PROCEDURE
13. How to remove the drain pan (ERS*series)
(1) Remove the front panel.
(2) Disconnect all the field piping.
• Use 2 wrenches to disconnect piping.
(3) R emove the screw on the manometer cover, then
remove the manometer claw. (Photo 13-1)
(4) R emove 3 screws on the cover plate. (Photo 13-2)
(5) Remove the cover plate.
(6) R emove 3 screws each on the side panel (L, R), and 3
screws on the underneath surface and base assy from
the hydrobox. (Photo 13-3)
(7) Remove 5 screws on the base assy. (Photo 13-4)
(8) Remove the drain pan from the base. (Photo 13-5)
Photo 13-3
Screws
Photo 13-5
Drain pan
OCH590B
Photo 13-1
Photo 13-2
Screws
Photo 13-4
Base
69
PHOTOS
Saddle
bands
Rubber tube
Rubber tube
Screws
Manometer
cover
Cover plate
Screws
Screws
Screw
Claw