Advertisement
This section provides information about the multiple monitor configurations.
Multiple monitor configurations
Wyse 3030 LT thin clients running ThinOS
Depending on your thin client model, connections to monitors can be made using either a DisplayPort, or a proper Dell monitor cables/
splitters/adapters.
For information about configuring dual head display settings, see
Wyse 3030 LT thin clients running ThinLinux.
In a Dual-monitor configuration, if both monitors are connected, then by default, the monitors are in span mode. The primary monitor is on
the left (monitor 1) and the secondary monitor is on the right (monitor 2). The resolutions of the monitors are auto detected by the system
by analyzing the monitor's capabilities.
For information about configuring dual head display settings, see
Configuring dual Head display settings on Wyse ThinOS
To configure the Dual head display settings:
1
From the desktop menu, click System Setup, and then click Display.
The Display dialog box is displayed.
2
Click Dual Head tab, and use the following guidelines:
6
Displays
Configuring the Dual Head display setting on
Customizing your display on
ThinLinux.
4
Displays
ThinOS.
Advertisement
