Advertisement
Figure 6. VMware login settings
Parameter
Host
Port
Protocol
Username
Password
Published Application
Enable interactive mode
Ping before connect
32
Software
Description
Enter the host name or IP address or FQDN of the Horizon of
the VMware View Server.
Enter the port number of the host.
From the drop-down list, select the specific protocol.
Enter the User ID that is used to log in to the remote Horizon
server.
Enter the password that is used to log in to the remote Horizon
server.
Click the ON/OFF button to enable or disable this option.
If enabled, specify the Published Application name.
If disabled, specify the Published desktop name.
Click the ON/OFF button to enable or disable this option.
If enabled, then after a successful connection to the server, it
displays all the published application and desktop icons. You can
start the applications or desktop sessions based on your choice.
If disabled, then the Published Applications option is enabled in
the Login tab.
Selecting that option enables you to directly start the application
or desktop that you specify.
Click the ON/OFF button to enable or disable this option. If
enabled, it pings the connection is checked in server IP/FQDN
before connecting to a session.
Advertisement
