This section describes about the Wyse Management Interface of 3030 LT running either ThinOS or ThinLinux.
•
For WDA settings on ThinOS, see
•
For WDA settings on ThinLinux, see
Topics:
•
Configuring the WDA settings on ThinOS
•
Configuring the WDA settings on ThinLinux
Configuring the WDA settings on ThinOS
Use this tab to configure the WDM and CCM settings.
To configure the WDA settings, do the following:
1
From the desktop menu, click System Setup, and then click Central Configuration.
The Central Configuration dialog box is displayed.
2
Click WDA, and use the following guidelines.
WDM is selected by default. WDA service automatically runs after the client boot up.
Wyse Management Interface
Configuring the WDA settings on
Configuring the WDA settings on ThinLinux
ThinOS.
Wyse Management Interface
10
35