Advertisement
Suggested Guttering System
If the locality where you have installed the
patio cover/carport could benefit from a gut-
tering system, we recommend the following
list of materials, (not included).
● ● ● ● ● Two 10' (304,8 cm) gutters with splice
or
● ● ● ● ● One 20' (609,6 cm) gutter
● ● ● ● ● One downspout
● ● ● ● ● One outlet
● ● ● ● ● One right & One left end cap
● ● ● ● ● Sealant
● ● ● ● ● Nine hidden hangers
with nine 1 1/2" (38 mm) bolts and nuts
● ● ● ● ● Three standard elbows
● ● ● ● ● Two bands
with four sheet metal screws
1
Assemble the gutter on the ground using
sealant.
2
Temporarily remove top front trim, lift as-
sembly to unit and mark top left and right end
trim where gutter meets trim. Remove gutter
system and notch (using tin snips) top L&R
end trim so gutter fits flush along front of unit.
3
Evenly space out five hidden hangers in
gutter, making sure one is in the outlet. Attach
gutter assembly to front facia/ front roof chan-
nel using five 1 1/2" (38 mm) bolts and nuts
through hidden hangers. Replace top front
trim.
4
Assemble the downspout on the ground.
5
Hold in place on outlet. Attach to post with
two bands. Drill 3/32" (2 mm) holes and fasten
with sheet metal screws.
(not included)
Left End Cap
Post
Screw
Top Front Trim
1 1/2" (38 mm) Bolt
Hidden Hanger
Gutter
Gutter
Outlet
Elbow
Elbow
Band
Downspout
Elbow
Top End Trim
Nut
Notch
Advertisement
