Advertisement
Step 1
The rear roof channel assemblies
attach to the permanent structure
and support the unit.
1
Fasten the channel braces to the
end of the left & right rear roof
channel using four #10-32x7/16"
(11 mm) bolts and square nuts.
Hint: Position the short and long
flange as shown in the diagram.
9665
● Parts Needed For ●
Rear Roof Channel
Pre-Assemblies
9673
Long Flange
Short Flange
● ● ● ● ● 9673 Left Rear Roof Channel (one)
● ● ● ● ● 9674 Right Rear Roof Channel (one)
● ● ● ● ● 9665 Channel Brace (two)
Long Flange
9674
9665
Short Flange
Advertisement
