Advertisement
Step 10 Leveling and Anchoring Posts
Check to be sure front facia and rear
roof channel are still square. Level
each post. Stand at one end and
visually check the alignment of the
post. Once all posts are aligned, mark
fastener location using holes in bot-
tom flanges of anchor bracket as a
Facia
guide.
Masonary
Using a masonary
Post
bit, drill holes to fit masonary fasten-
ers (not provided). Attach bottom
flanges of anchor bracket to slab or
footing, using instructions packed
with masonary fasteners.
Deck
Using a wood bit, drill holes
Level
to fit wood fasteners (not provided).
Attach bottom flanges of anchor
bracket to deck, using instructions
packed with wood fasteners.
Anchor Bracket Flange
Post
Drill
Pencil
Masonary Anchors
Anchor Bracket Flange
Advertisement
