Advertisement
Step 5
1
Place right and left facia over
front roof channels with largest
amount of holes on top. Butt together
and fasten bottom flange with ten
#10Ax 3/8" (10 mm) screws. Fasten
top flange using six #10 screws where
shown.
2
Place right and left facia over end
roof channels. Fasten bottom flange
with five #10 screws. Fasten top
flange in the same manner.
3
Place a well-nut on top flange of
the front right and left facia. Insert all
the way into pre-drilled hole until
flange is firmly against mounting sur-
face. Continue along length of the
front right and left facia pieces.
● Parts Needed For ●
Facia Assembly
STEP
3
Press firmly against mounting surface
9657
Overlap
● ● ● ● ● 9654 Right Facia (two)
● ● ● ● ● 9657 Left Facia (two)
#10-32 Well-Nut
9657
Facia
STEP
2
9654
STEP
9654
1
Post
Roof Channel
Advertisement
