Advertisement
Step 3
1 Positioning
cm) minimum to 9' (274,3 cm) maximum. For unit installed over a door, in order to maintain door clearance, the
minimum height above door is 6" (15,2 cm). If distance is less than 8'-8 1/2" (265,4 cm), bottom of posts will have
to be trimmed (with hacksaw) in order to obtain 2 1/2" (6,4 cm) slope. If this is necessary, drill two new holes in
post and re-attach anchor. For installation where a door is not involved, do not block windows with rear roof
channels. Once dimensions are established, level rear roof channels and mark structure.
9673
9665
2 Channel Weather Stripping
end, on the outside of rear roof channel. Making sure weather stripping is flush with top flange of rear roof
channel, continue to stick weather stripping to rear roof channels. Peel paper backing.
● Parts Needed For ●
Mounting Rear Roof
Channels to Structure
The height from the bottom of post to the bottom of rear roof channel is 8'-8 1/2" (265,4
6" (15,2 cm) Min.
Level
Concrete
1/2x1 1/2 (13 mm x 3,8 cm)
9674
9665
8'-8 1/2" (265,4 cm) Min.
9' (274,3 cm) Max.
Attach weather stripping 1/2x 1 1/2 (13 mm x 3,8 cm) to one
Rear Roof Channel Assemblies
Weather Seal
● ● ● ● ● Rear Roof Channel Assembly (two)
● ● ● ● ● 66627 Weather Seal
1/2x 1 1/2 (13 mm x 3,8 cm) (two)
Post
END VIEW
Advertisement
