Advertisement
Step 4
Get help holding post in place while
attaching the roof channel.
1
Position a roof channel, with small
hole 1 1/8" (2,9 cm) from end at left
post, and fasten to channel brace us-
ing four #10-32x 7/16" (11 mm) bolts
and square nuts. Fasten other end to
the top end of the left post, noting
location of lock seam, using two #10-
32x7/16" (11 mm) bolts and square
nuts, and two #10Ax3/8" (10 mm)
screws.
2
Fasten a roof channel, with small
hole 1 1/8" (2,9 cm) from end, to the
front of left post, using the same fasten-
ers, with opposite end overlapping
center post by 1 1/2" (3,8 cm), fasten
as before. Brace center of unit with
2x4's (38 mm x 89 mm) as shown.
3
Repeat procedure with next roof
channel, to center and right post.
4
Repeat procedure with next roof
channel, as done in Step 1 to right post
and channel brace.
● Parts Needed For ●
Roof Channel
Assembly
9656
#10-32x7/16"
(11 mm) Bolt
#10Ax3/8"
(10 mm) Screw
1 1/8"
(2,9 cm)
● ● ● ● ● 9656 Roof Channel (four)
● ● ● ● ● Post Assemblies (three)
Lock Seam
1 1/8"
(2,9 cm)
STEP
2
9656
1 1/8"
(2,9 cm)
STEP
1
#10-32 Square Nut
9661 Left Post
9671 Center Post
Advertisement
