Table of Contents
Advertisement
ZXV10 ET501 Product Description
No.
Description
4
USB interface (USB).
l
l
Note: If use the switch hub of USB interfaces, the ZXV10 ET501 can connect to 8 USB
devices at most.
•
Interfaces 1, 2, and 3 are basic interfaces. USB interface is optional interface.
Interface Protocols
For the protocols that the interfaces of the ZXV10 ET501 must comply with, refer to
6-2.
Table 6-2 Interface Technical Specifications
Interface
Type
Network
interface
Video input
interface
Video
output
interface
Audio input
interface
Audio
output
interface
SJ-20161028111501-001|2017-04-10 (R1.0)
Connected to a standard touchscreen TV so the ZXV10 ET501 can be controlled
through the touchscreen TV.
Connected to a USB drive so you can browse and operate the files in the USB drive
through the ZXV10 ET501.
Description
Protocol
1×LAN (IP: 10/100
IEEE 802.3, IP:
Base-T, RJ-45)
10/100Base-T
built-in Wi-Fi
IEEE
(Including Access
802.11a/b/g/n
Point)
1× built-in camera
Video and
control cables
1× A200
-
1×HDMI
HDMI1.4
2×built-in MIC
-
1×HDMI audio out
HDMI 1.4
Supported
Network
Architecture
IP network
Wireless IP network
1080p@30 HD
camera input
Auxiliary video
wireless access
Connected to the
TV.
-
Outputs voice.
6-2
ZTE Proprietary and Confidential
Table
Remark
-
-
-
External auxiliary
video cannot be
connected if no
A200 is configured.
-
Two built-in omni
microphones, one
on the left of the
front panel, the other
on the right.
-
Advertisement
Table of Contents
