Chapter 5 Network Deployment - Zte ZXV10 ET501 Product Description

Chapter 5
Network Deployment
Table of Contents
Networking Modes......................................................................................................5-1
Default Ports .............................................................................................................5-2
5.1 Networking Modes
When a ZXV10 ET501 terminal is connected to the IP network, it can hold point-to-point
conferences with other terminals in the network. Different networking modes are used for
different multipoint conference types.
Figure 5-1
through an external MCU (such as the videoconference server ZXV10 M900).
l
In area A, the ZXV10 ET501 terminal and the MCU server are in the same
public network, which is applicable to a conference among different companies or
organizations in the same public network.
l
In area B, the ZXV10 ET501 terminal and the MCU server are in the same private
network, which is applicable to an interdepartmental conference in a company.
l In area A, the MCU server configures two segments, one for the public network
and the other for the private network. This networking is applicable to both an
interdepartmental conference in a company and a conference between different
companies or organizations in the public and private networks.
l
If A, B, and C form a MCU server cascading network, this network is applicable to
a conference among companies or organizations that are in the public and private
networks. In this case, multiple MCUs are used.
SJ-20161028111501-001|2017-04-10 (R1.0)
shows the networking mode in which a ZXV10 ET501 holds a conference
5-1
ZTE Proprietary and Confidential