a
Pull the clips securing the memory module until the module snaps-out [1].
b Remove the memory module from the connector on the system board [2].
Installing memory module
1
Insert the memory module into the connector until snaps in.
2
Install the following:
a
battery
b
base cover
3
Follow the procedures in
Heat sink
Removing heat sink assembly
Heat sink assembly comprises of heat sink and the system fan.
1
Follow the procedure in
2
Remove the following:
a
base cover
b
battery
3
To remove the heat sink assembly:
NOTE:
To identify the number of screws, see the
After working inside your
Before working inside your
computer.
computer.
screw
list.
Removing and installing components
19