Dell Latitude 7290 Owner's Manual page 57

Option Description
Boot sequence
•
options
Boot list options
•
•
Advanced Boot This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled.
Options Enable Attempt Legacy Boot is disabled by default.
UEFI boot path
•
security
•
•
Date/Time Allows you to change the date and time.
System Configuration screen options
Option Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
•
•
•
•
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
•
•
•
Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
•
•
SMART Reporting This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This option is
disabled by default.
•
USB Configuration
This is an optional feature.
This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any
type of USB Mass Storage Devices—HDD, memory key, floppy.
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
Windows Boot Manager
Legacy
UEFI—selected by default
Always, except internal HDD
Always
Never
Disabled
Enabled
Enable UEFI network stack: This option is enabled by default.
Enabled w/PXE
Disabled
AHCI
RAID On: This option is enabled by default.
SATA-2
M.2 PCI-e SSD-0
Enable SMART Reporting
System setup 57