Dell Latitude 7290 Owner's Manual page 59

Hide thumbs Also See for Latitude 7290:
Table of Contents

Advertisement

Option
Description
Unobtrusive Mode
This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To resume normal
operation, press Fn+F7 again. This option is disabled by default.
Miscellaneous
Allows you to enable or disable the following devices:
Devices
Video screen options
Option
Description
LCD Brightness
Allows you to set the display brightness depending up on the power source—On Battery and On AC. The LCD
brightness is independent for battery and AC adapter. It can be set using the slider.
NOTE:
The video setting is visible only when a video card is installed into the system.
Security screen options
Option
Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password.
Default setting: Not set
System Password
Allows you to set, change, or delete the system password.
Default setting: Not set
M.2 SATA SSD-2
Allows you to set, change, or delete the password on the system's M.2 SATA solid state drive(SSD).
Password
Default setting: Not set
Strong Password
Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password
Allows you to specify the minimum and max password lengths of the Administrator and System passwords.
Configuration
Never
Enable Camera—enabled by default
Secure Digital (SD) card—enabled by default
Secure Digital (SD) card boot
Secure Digital (SD) card read-only-mode
NOTE:
You must set the admin password before you set the system or hard drive password. Deleting the
admin password automatically deletes the system password and the hard drive password.
NOTE:
Successful password changes take effect immediately.
NOTE:
Successful password changes take effect immediately.
NOTE:
If Strong Password is enabled, the Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
min-4—by default, if you want to change you can increase the number
max-32—you can decrease the number
System setup
59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents