Part Identification Chart - NordicTrack NTEVEX76017.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M4 x 15mm
M6 Washer
M8 Locknut
Screw (63)–6
(112)–8
(102)–2
M6 x 20mm M6 x 30mm M6 x 50mm Screw
(42)–1
Screw (67)–4 Screw (51)–4
M8 x 40mm
M8 x 13mm M8 x 50mm Bolt
Screw (94)–6 Screw (56)–4 (49)–2
M10 x 20mm M10 x 96mm Screw (110)–2
Screw (60)–4
M10 x 120mm Screw (44)–2
5