Configuring Wireless Radio Settings - Cisco ISA550 Administration Manual

Configuration Wizards
Using the Setup Wizard for the Initial Configuration
STEP 35
STEP 36
STEP 37
Cisco ISA500 Series Integrated Security Appliances Administration Guide
For example, you host an RDP server (192. 1 68. 1 2. 1 01) on the DMZ. Your ISP
has provided a static IP address (172.39.202. 1 02) that you want to expose to
the public as your RDP server address. You can create a DMZ service as
follows to allow Internet user to access the RDP server by using the
specified public IP address.
Original Service
Translated Service
Translated IP
WAN
WAN IP
Enable DMZ Service
Create Firewall Rule
NOTE: In this example, you must manually create two address objects (RDPServer
and PublicIP) and a TCP service object with the port 3389 called "RDP."
Click OK to save your settings.
After you are finished, click Next.

Configuring Wireless Radio Settings

If you are using the ISA550 or ISA570, proceed to
Summary, page 50. If you are using the ISA550W or ISA570W, use the Wireless
Radio Setting page to configure the wireless radio settings.
• Wireless Radio: Click On to turn wireless radio on and hence enable the
SSID called "cisco-data," or click Off to turn wireless radio off.
• Wireless Network Mode: Choose the 802. 1 1 modulation technique.
- 802.11b/g mixed: Choose this mode if some devices in the wireless
network use 802. 1 1b and others use 802. 1 1g. Both 802. 1 1b and 802. 1 1g
clients can connect to the access point.
- 802.11g/n mixed: Choose this mode if some devices in the wireless
network use 802. 1 1g and others use 802. 1 1n Both 802. 1 1g and 802. 1 1n
clients can connect to the access point.
RDP
RDP
RDPServer
WAN1
PublicIP
On
On
Viewing Configuration
2
47