Cisco ISA550 Administration Manual page 287

VPN
Viewing VPN Status
Cisco ISA500 Series Integrated Security Appliances Administration Guide
Field
Remote Gateway
Local Network
Remote Network
Statistics
Name
VPN Type
WAN Interface
Remote Gateway
Tx Bytes
Rx Bytes
Tx Packets
Rx Packets
Teleworker VPN Client
If the Teleworker VPN Client feature is enabled and the security appliance is
acting as a Cisco VPN hardware client, the following information is displayed.
Status
Primary DNS
Description
IP address of the remote peer.
NOTE: For a site-to-site VPN session, it displays the IP
address of the remote gateway. For an IPsec VPN
session between the Teleworker VPN client and a
remote IPsec VPN server, it displays the IP address of
the IPsec VPN server. For an IPsec VPN session
between the IPsec VPN server and a remote VPN
client, it displays the IP address of the remote VPN
client.
Subnet IP address and netmask of your local network.
Subnet IP address and netmask of the remote
network.
VPN policy used for an IPsec VPN session.
VPN connection type for an IPsec VPN session.
WAN port used for an IPsec VPN session.
IP address of the remote peer.
Volume of traffic in kilobytes transmitted from the VPN
tunnel.
Volume of traffic in kilobytes received from the VPN
tunnel.
Number of IP packets transmitted from the VPN tunnel.
Number of IP packets received from the VPN tunnel.
Shows if the Teleworker VPN Client feature is enabled
or disabled.
IP address of the primary DNS server.
8
287