Viewing Ssl Vpn Summary - Cisco ISA550 Administration Manual

Configuration Wizards
Using the Site-to-Site VPN Wizard to Configure Site-to-Site VPN
STEP 20
STEP 21
STEP 22
STEP 23
Using the Site-to-Site VPN Wizard to Configure Site-to-Site
VPN
Cisco ISA500 Series Integrated Security Appliances Administration Guide
• To create a new member, enter the username in the User Name field and the
password in the Password field, enter the same password in the Password
Confirm field for confirmation, and then click Create.
Click OK to save your settings.
After you are finished, click Next.

Viewing SSL VPN Summary

Use the SSL VPN Summary page to view information for all configured SSL VPN
group policies and user groups.
To modify any settings, click Back. If the configuration is correct, click Finish to
apply your settings.
After the settings are saved, the security appliance is set as a SSL VPN server.
The SSL VPN users that belong to the specified user groups can use the selected
group policies to establish the SSL VPN connections. If you check Client Internet
Access, the advanced NAT rules will be automatically created to allow SSL VPN
clients to access the Internet over SSL VPN tunnels.
Use the Site-to-Site VPN Wizard to configure a site-to-site VPN policy to provide a
secure connection between two routers that are physically separated. Refer to the
following steps:
• Starting the Site-to-Site VPN Wizard, page 67
• Configuring VPN Peer Settings, page 67
• Configuring IKE Policies, page 68
• Configuring Transform Policies, page 69
• Configuring Local and Remote Networks, page 70
• Viewing Configuration Summary, page 70
2
66