Recording An Audio Track - DigiDesign DIGI 1 Quick Start Manual

Mic/Line High-Pass Filter
Digi 001 includes a high-pass filter set at 60 Hz. This filter can be useful for filtering out
low-end rumble from a noisy recording environment or microphone handling, or AC
noise.
To use the high-pass filter on analog input 1 or 2:
Choose Setups > Hardware, then click Other Options.
1
Enable the high-pass filter for the required inputs.
2

Recording an Audio Track

To record a track:
Record enable the desired track and assign an input to it. Set the input levels
1
appropriately.
Display the Transport window (Windows > Show Transport) and click Return to Zero to
2
ensure that you are starting from the beginning of the session. You can also record
according to a selection or from the cursor location in the Edit window.
Click Record in the Transport window to enable recording.
3
Click Play or press the Spacebar to record on all record-enabled tracks.
4
Click Stop in the Transport window or press the Spacebar when you are done recording.
5
Recording from the beginning of a session
Return to Zero
click to record from the
beginning of session
click Play to start recording
click to enable recording
(turns bright red)
Chapter 6: Recording 67