Remove The Base Grille - KitchenAid KUWS24RSBS Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1. Open the unit door.
2. Using a Phillips screwdriver, remove the
two screws that secure the base grille to the
unit.
Screws
3. Push both tabs in toward the center to re-
lease the base grille from the unit.

REmOVE THE BASE GRILLE

Tabs
Push tab
4. Remove the base grille.
5. Components accessible with the base grille
removed are:
• Condenser
• Thermostat control
• Door switch
Rocker light switch (not included on the Un-
•
dercounter refrigerator)
Condenser
Thermostat Knob
4-13
Door Switch
Rocker Light Switch