Remove The Evaporator Cover - KitchenAid KUWS24RSBS Technical Education

Beverage center/undercounter refrigerator,
Hide thumbs Also See for KUWS24RSBS:
Table of Contents

Advertisement

REmOVE THE EVAPORATOR COVER

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
1.
Remove the racks. (See page 4-1)
2.
Remove the tracks. (See page 4-2)
3.
UW / BC: Remove the separator. (See page
4-3)
4.
Remove the six screws that secure the evap-
orator cover to the unit.
Remove Six
5.
Pull the cover away from the evaporator and
turn it to the side to gain access to the com-
ponents behind the cover.
Screws
6.
To remove the cover completely, disconnect
the connectors from the back of the unit. The
evaporator fan connector is on the left, the
separator display on UW / BC is on the right,
and one ground wire from the evaporator is
on the right on all models. (See page 4-9)
Evaporator Fan
Connector
7.
Components accessible with the evaporator
cover removed are:
Evaporator Fan & Motor (Page 4-5)
Main thermostat (Pages 4-6, 4-7 & 4-8)
Defrost heater (Page 4-9)
Defrost thermostat & thermal fuse (Page
4-10)
Evaporator (Page 4-11)
4-4
Separator Display
Connector

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents