Axis Q3517-LV Installation Manual page 13

4. Wind the network cable along the grooves on the mounting bracket to keep extra cable
length that may be required later.
Route the cables through a pipe
1. Use the drill template to drill four holes for the mounting bracket, and one hole for the
pipe if it is attach through the back of the mounting bracket.
2. Attach the mounting bracket to the wall with appropriate screws.
A Maximum 8 mm
B
3/4
C
1/2
3. Attach the pipe with the lock nut using Loctite® threadlocker between the nut and
the threads on the pipe.
4. Check that distance A is within limits.
5. Route the cable through the pipe.
AXIS Q3517–LV Network Camera
"
pipe
"
pipe
13
EN