Motorola B801 User Manual page 7

1. Plug the power adapter with smaller pin plug & telephone line cord into the base. Power
adapter with bigger pin plug is for charger (for multi-pack only).
2. Plug the other end of the power adapter & telephone line cord into the wall jack.
3. Always use the telephone line cord provided in the box.
4. Use only the provided power adapter.
Install and charge the handset battery pack
1. Slide out the battery compartment cover.
2. Place the supplied rechargeable battery pack in the battery compartment, with the battery
connector plugged in, as shown.
3. Slide the battery compartment cover back.
4. Put the handset on the base to charge for at least 24 hours. The <Battery icon> will indicate
when the handset is fully charged.
5. Use only the rechargeable battery pack provided.
BATTERY LOW WARNING
If the <Battery icon> flashes in the display, you will need to recharge the handset before you can
use it again. During charging, the <Battery icon> will scroll in the display.
BATTERY PERFORMANCE
In ideal conditions, a fully charged battery pack should give up to 8 hours talk time and up to 100
hours standby time on a single charge.