Table of Contents
Advertisement
5. Press MENU/SELECT to save your preference and return to the feature menu.
8.7
Remote access
Remote access allows you to operate your answering machine and listen to your messages by
calling your phone from another phone.
1. Press MENU/SELECT when in idle mode to enter the feature menu.
2. Use DIR / CID to scroll to >SETUP BS.
3. Press MENU/SELECT and DIR / CID to select >REMOTE ACCESS.
4. Press MENU/SELECT and DIR / CID to select ON or OFF.
5. Press MENU/SELECT to save your preference and return to the feature menu.
To remotely access your answering system:
1. Dial your telephone number from another telephone.
2. When the system answers, enter the three-digit remote access code (default remote access
code is 123). The system will automatically announce the number of messages (new and/or old) if
there are any, and then begin to play them.
3. You can also enter the following remote commands.
4. Hang up to end the call and save all undeleted messages.
1
Press to listen to all messages.
2
Press to hear only new messages.
3
Press to delete the current message during playback.
Press twice to delete all old messages
4
Press to repeat the current message during playback.
Press twice to listen to the previous message.
5
Press to stop any operation, including recording.
* 5
Press to listen to a list of remote commands.
6
Press to skip to the next message during playback.
* 7
Press to record a new announcement.
0
Press to turn the answering system on or off.
8
Press to end remote access (the call will be terminated).
8.8
Set the security code
1. Press MENU/SELECT when in idle mode to enter the feature menu.
2. Use DIR / CID to scroll to >SETUP BS.
3. Press MENU/SELECT and DIR / CID to select >SECURITY CODE.
4. Press MENU/SELECT and you will be prompted to enter the code.
5. Enter your 3-digit security code. Press DELETE/MUTE to delete digit while entering.
6. Press MENU/SELECT to save your preference and return to the feature menu.
Advertisement
Table of Contents
