Cobalt Digital Inc 9902-2UDX Product Manual page 87

Operating Instructions
Table 3-2 9902-2UDX Function Menu List — continued
Note: • Line number control available only for AFD format. WSS and VI use fixed line numbers per applicable standards.
• Some AFD codes are not supported in WSS and VI formats. Refer to AFD/WSS/VI Translation Matrix on page 3-51 for
more information.
• Input Format Status Displays
• Scaler AFD Enable
• Input Mapping
9902-2UDX-OM (V1.0)
•
•
•
9902-2UDX PRODUCT MANUAL
9902-2UDX Function Menu List and Descriptions
AFD/WSS/VI sub-tab provides prioritized and gated input monitoring
for AFD, WSS and/or VI formats. Also provides translation between
input and output AFD, WSS, and VI ARC formats.
Displays the current status and contents of the three supported ARC
formats shown to the left.
• If a format is received, the current formatting code and description is
displayed (as shown in the example).
• If a format is not receiving data, Not Present is displayed.
Enables scaler to apply ARC settings provided by ARC controls in this
function.
• Enabled sets the output aspect ratio to track with AFD settings
performed in this tab, overriding any other scaler manual ARC control
settings.
• Disabled allows ARC coding processing performed in this tab, but does
not apply ARC settings in scaler.
Note: • This control also appears on the Scaler tab and is mutually
ganged with the selection performed on either tab.
• Scaler follows AFD functions only when a valid AFD output
format is being generated and enabled. The scaler only observes
AFD code commands, with the controls on this tab set to
generate an AFD-coded output. WSS and/or VI formats must be
translated to a supported AFD cross-translation for scaler active
ARC to function when using WSS or VI input formats.
When received ARC code is received, applies H/V coding as follows:
• Follow Trigger – Uses the ARC coding inherent in the received
triggering ARC.
• 4x3 ARC Codes – For received triggering formats coded as 4x3,
applies the H/V coding selected in this drop-down.
• 16x9 ARC Codes – For received triggering formats coded as 16x9,
applies the H/V coding selected in this drop-down.
Note: Settings performed here can be applied directly to the output
video, or the settings applied here can be custom modified if
desired for any of the 11 4x3 codes and any of the 11 16x9 codes
available here using the AFD Map sub-tab. Refer to AFD/WSS/VI
Translation Matrix on page 3-51 for more information and coding
descriptions.
3-49