3
Table 3-2
9902-2UDX Function Menu List — continued
Note: •
Flex Mix input channels Flex Mix 2 thru Flex Mix 16 have controls identical to that described here for Flex Mix 1.
Therefore, only the Flex Mix 1 controls are shown here.
•
For each Flex Mix input channel, its source should be considered and appropriately set. Unused input channels should
be set to the Silence selection.
• Flex Mix Input Channel Source/Bus
Assignment
• Gain / Mute Control
3-24
9902-2UDX Function Menu List and Descriptions
(continued)
Using the Source drop-down list, selects the audio input source to be
directed to the corresponding bus channel from the choices listed below.
• Silence
• Embed Ch 1 thru Embed Ch 16
• AES Ch 1 thru AES Ch 16
• Analog Ch 1 thru Analog Ch 4
The Flex Bus drop-down selects the bus (A thru P) to which the input is
assigned to.
Note: See the examples on the previous page showing various types of
mixers using multiple flex buses.
Provides relative gain (in dB) control and a channel Mute checkbox.
(-80 to +20 dB range in 0.1 dB steps; unity = 0.0 dB)
9902-2UDX PRODUCT MANUAL
9902-2UDX-OM (V1.0)