Table of Contents
Advertisement
Operating Instructions
Web HTML5 User Interface
Typical web GUI Menu tabs
The card edge alphanumeric
display, along with card model ID,
shows a scrolling message
showing current card IP address
(in this example, 10.99.11.119)
9902-2UDX-OM (V1.0)
(See Figure 3-4.) When equipped with a rear I/O module having an Ethernet
port, the 9902-2UDX controls can be accessed via a web network connection
with no additional remote control software needed. The web GUI shows the
same tabs, controls and status displays as those accessed using DashBoard™.
This allows very convenient control access to the card, even if using a
computer without DashBoard remote control or in case the frame network
connection is down.
The card can be accessed in a web browser by entering the card IP address as
set in the card
Admin
IP Address) (p. 3-66) for more information.)
Note:
Card must be equipped with a rear I/O module with an Ethernet port to use
html access. The card address is entirely independent of, and requires no
association with, the frame openGear IP address.
Typical web GUI controls and status displays
I
1
P
0.
:
Figure 3-4 Typical Web GUI Tabs and Controls
9902-2UDX PRODUCT MANUAL
Control and Display Descriptions
tab. (See Admin (Log Status/Firmware Update - Card
9
1
9.
1.
1
1
9
3-5
Advertisement
Table of Contents
Troubleshooting
