DirecTV GENIE AIR Product Manual page 51

XII. LED S
UMMARY
A. F P LED
RONT ANEL S
1. Status LED Table
Color
Off/No Color
Flashing Green
Solid Blue
Solid Yellow
Solid Green
Solid Red
Flashing Red
Flashing White
Version 1.3.0 – 11/22/2016
Interpretation
No Power
Booting (Also IV Active, Data Feed Tests)
Activation / Client Add Ready
(Internal WVB has a good Connection to
the Server but No Clients paired with
Wireless Video Bridge
)
Dish Not Detected (or) IV / Data Feed
Failed
System Ready / Config Complete
(Wireless Clients should have a
connection to the server)
(normal operating color)
System Error
System Error, trying to self-repair
Downloading Software
Page 47
Product Manual Genie Air
Troubleshooting
Check if the Power LED at
the back panel is Green and
wait for 10 seconds.
If LED continues to remain
Off, reboot server.
Normal Behavior during
boot-up
Normal Behavior during
guided setup.
This state occurs during
guided setup.
Check the Mobile
Installation App or RVU
client to see the error screen
and troubleshoot
accordingly.
Normal Behavior on boot-up
complete. (Normal operating
state).
TM
Restart the .
Genie Air
If LED continues to display
Solid Red, replace the
Genie
TM
Air .
Wait for TBD minutes to
check if the LED changes to
another state.
TM
Else restart the
Genie Air .
If the LED continues to
display Flashing Red, replace
TM
the .
Genie Air
Normal Behavior during
SWDL.
DIRECTV, Inc. Proprietary and Confidential
TM
功 功 功 功 能變 能變數代 數代碼變 碼變更 更 更 更
能變 能變 數代 數代 碼變 碼變