DirecTV GENIE AIR Product Manual page 25

If Video Bridge Survey Mode is "Inactive" and the Signal Quality is
•
"Waiting", the user must press the Add Client button on the top of Genie
TM
Air or on a previously connected client navigate to Menu -> Settings ->
Whole-Home -> Manage Clients -> Add Clients. The Add Client
(Discovery) mode is enabled for a maximum of 20 minutes (each time the
Add Client button is pressed), and it will time out. Once Signal Strength
becomes Excellent or Good, the user can select "Connect Now".
4) The Wireless Client will connect to the Genie Air
Process section below to add clients.
3. RVU TV / 4K RVU TV
The following are the steps to install the RVU / 4K RVU TV client.
1) Connect the RVU / 4K RVU TV to the SWiM/MoCA network (Normal install
using the DECA or USB DECA)
2) Connect the power cable and turn on the TV.
3) Get to the DIRECTV Ready input.
4) Follow the Add A Client Process section below to add RVU / 4K RVU TV.
C. A C P
DD A LIENT ROCESS
The Add Client process will be different than current Genie process.
Full Client Tracking process will be used to Add Clients (Genie Air
Mode). Full Client Tracking is documented in detail in the D-088 Goliath-Flower SWDL Tech
Comm (Refer the Appendix).
In Full Client Tracking, the users do not need the Server Pin to Add or Replace clients.
1) Once the clients are connected, the following screen is displayed in the client.
FIGURE 14: FULL CLIENT TRACKING - ADD A CLIENT SCREEN
2) The user needs to follow on-screen instructions to Add the client. Refer D-088
Goliath-Flower Tech Comm (Refer the Appendix). See "Add a Client when in
Lenient Mode or when in FCT mode" section III.B.3.b
Version 1.3.0 – 11/22/2016
Product Manual Genie Air
TM
. Follow the Add A Client
Page 21 DIRECTV, Inc. Proprietary and Confidential
TM
TM
does not use Lenient
功 功 功 功 能變 能變數代 數代碼變 碼變更 更 更 更
能變 能變 數代 數代 碼變 碼變