“Summer” And “Winter” Modes And Setting The “Timers”; Mode Selection: “Summer” Or “Winter”; Programming The Timers According To The Modes - Zodiac EIXPERT Owner's Manual

Boost
Back
Select
• Press the button to access the user menu, the minutes start to flash.
Boost
Low
• Use the and buttons to set the minutes, then press
Back
Back
Boost
• Use the and
Low
Back
Back
• Press the button to return to the home screen.
Low
"Summer" and "Winter" modes and setting the "Timers"
"Timer" programming is used to define the device operating times within the filtering system
operation times. The daily operating times must be sufficient to correctly treat the water. EiXpert has
default settings of Timers 1 and 2. However they can be customised.
The EiXpert chlorinator can store 2 seasonal operating modes called by default "SMR" and "WIN".
The following settings can be customised for each mode:
- the device operating times, the "timers": T1 (Timer 1) and T2 (Timer 2)
- the required chlorine production rate: 10 %, 20 %, 30 %,... up to 100 %.
Boost
Mode selection: "SUMMER" or "WINTER"
Select
• Press
4 times to set the clock. "SMR" starts to flash.
Back
Boost
Low
• Use the
and
Back
the home screen.
Low

Programming the timers according to the modes

The times of Timers 1 and 2 cannot overlap. In addition, the time range of Timer 1 necessarily precedes
that of Timer 2.
TS1 / TS2 = Timer in "summer" mode No. 1 / Timer in "summer" mode No. 2
Boost
Select
• Press 4 times to set the clock. "SMR" starts to flash.
Low
• Select the mode to be customised "SMR" or "WIN" using the
store and move to the timer setting screen.
Back
Boost
• Use the and
Back
Back
Boost
• Use the and
Low
Back
6
Low
Boost
Select
Select
Boost
buttons to set the hours, then press
Low
Select
Select
Low
STANDBY = Device operating status
T = "Timer" mode (always active)
SMR = "Summer" operating mode
80 % = chlorine production rate
14:25 = time in 24 h format
Boost
Select
buttons to choose "SMR" or "WIN" mode, then press the
Low
Select
08:00-12:00 = Operating time range of Timer No. 1
14:00-20:00 = Operating time range of Timer No. 2
Boost
Select
Boost
buttons to set the Timer 1 stop minutes, then press
Low
Select
Select
buttons to set the Timer 1 stop hours, then press
Low
Select
Boost
Boost
Back
Select
to store.
Back
Low
Low
Back
Back
Back
Select
to store.
Back
Boost
Back Select
Boost
Back
and buttons, then press
Boost Low
Select
Low
Boost
Select
to store.
Select
Low
to store.
Low
Boost
Select
button to return to
Low
Boost
Select
to
Low