Warnings; Important Information; General Warnings; Child Safety - Zodiac EIXPERT Owner's Manual

Saltwater chlorinator
Hide thumbs Also See for EIXPERT:
Table of Contents

Advertisement

• Read this manual carefully before installing, maintaining or repairing this appliance!
• The symbol
consideration in order to avoid all risks of harm to persons or damage to the appliance.
• The symbol
At Zodiac, we take safety seriously. Always exercise caution when using electrical appliances and follow
the instructions. Failure to do so could result in permanent injury, electrocution or drowning.

Important Information

YOU MUST READ THIS INFORMATION BEFORE INSTALLATION. ALWAYS READ THE LABEL AND OPERATION
MANUAL BEFORE USING. PLEASE KEEP YOUR MANUAL AS IT CONTAINS YOUR WARRANTY.

General Warnings

Zodiac saltwater chlorinators are designed for domestic swimming pool use only. Contrary use could
affect performance and void warranty. Operating a chlorinator without water flowing through the cell
may cause a build up of flammable gases, resulting in fire or explosion. Keep equipment out of reach of
children. A damaged supply cord should only be replaced by the manufacturer, or an authorized Zodiac
service agent.
When installing and using this electrical equipment, always follow basic safety precautions. Before
performing installation, disconnect all power. For swimming pools, Zodiac recommends a range between
1 - 3 parts Per Million (ppm) of free available chlorine must be maintained at all times. Service to Zodiac
equipment should only be carried out by qualified and authorized pool professionals.

Child Safety

Children should not be allowed to operate or perform maintenance on this product. No one, particularly
children, should sit, step, lean, or climb on any of your pool's operational system. In the interests of child
safety, all components of a pool's operational system should be located at least 3.5 metres away from
the pool to meet Australian Standards.
Electrical Hazard
Should a lack of water be detected, the unit's electronic flow switch is designed to turn off the system.
Interfering with the electronic flow switch could result in personal injury and/or damage to the cell.
One pump per electrical socket only (no ancillary equipment should be connected to the same outlet).
This outlet is rated for pumps up to 2HP maximum. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do not play with
the appliance.
Please Note: Australian standards for the installation of the chlorinator should be carried out by a qualified
person in accordance with the Australian wiring rules AS/NZS 3000. The chlorinator power pack should be
located in the correct pool zone and connected to supply via a power outlet that is protected by a residual
current device (RCD) having a rated residual operating current not exceeding 30mA. The power outlet
should have a degree of protection suitable for the pool zone. Ensure that equipotential bonding of all parts
of the pool installation is carried out.
2
indicates important information that it is imperative to take into
indicates useful information.

Warnings

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents