OPERATION
Safety Operating Area
To avoid the unit fall down due to it is quite high, make sure operate it in
safety area as shown. (Heavy stack pulley ratio 1:2 99" (252cm) ; Light stack
pulley ratio 1:4 118" (300cm).) Safety clearance (600mm) required as below
shown. Do not allow people to be near this area when operating.
And do not drastic pull the handle suddenly even in safety operating area.
(Note: Please refer page 23 to secure the floor fixing bracket properly to
make sure the machine is firmly fixed to the floor when operating for safety.)
HEAVY STACK
PULLEY RATIO 1:2
99"(252cm)
HEAVY STACK
PULLEY RATIO 1:2
99"(252cm)
LIGHT STACK
LIGHT STACK
PULLEY RATIO 1:4
PULLEY RATIO 1:4
118"(300cm)
118"(300cm
DANGER
30