STEP 5
Install the Weight Plates (Continued)
(Note: When one side of the weight plates is installed completely, follow the
same procedure to install the other side.)
(a) Hold the upper stack plate and then cut the zip tie. Gently lower the upper
stack plate into place.
(b) Remove screws (34) that secure the guide rods to the top of the weight
stack frame, and then set the guide rod downward into place.
(c) Tilt the guide rod backward and then lift the upper stack plate off the guide
rods as shown. (Note: Carefully set the upper stack plate aside.)
(a)
(b)
12
(c)