Installing the SSD frame
1
Place the SSD frame to the slot in the system.
2
Replace the single (M2x3) screw that secures the SSD frame to the system.
3
Install the:
a
SSD card
b
battery
c
base cover
4
Follow the procedure in
Hard drive
Removing hard drive
1
Follow the procedure in
2
Remove the :
a
battery
b
base cover
3
To remove the hard drive:
a
Disconnect the hard drive cable from the connector on the system board [1].
b Remove the four (M2 x 2.7+2.7) screws that secure the hard drive to the system [2].
c
Lift the hard drive away from the system.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
17