Installing the SSD card
1
Insert the SSD card into the connector on the system.
2
Replace the single (M2x3) screw that secures the SSD card to the system.
3
Place the Mylar shield over the SSD.
4
Install the :
a
battery
b
base cover
5
Follow the procedure in
Removing the SSD frame
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
c
SSD card
3
To remove the SSD frame:
a
Remove the single (M2x3) screw that secures the SSD frame to the system [1].
b Lift the SSD frame away from the system [2].
16
Removing and installing components
After working inside your
computer.
Before working inside your
computer.