Wireless Screen Options - Dell Latitude 5490 Owner's Manual

Option Description
Enable VT for Direct I/O: This option is enabled by default.
Trusted Execution This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional hardware
capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization Technology, and Virtualization
technology for direct I/O must be enabled to use this feature.
Trusted Execution: This option is disabled by default.

Wireless screen options

Option Description
Wireless Switch Allows to set the wireless devices that can be controlled by the wireless switch. The options are:
•
•
•
•
All the options are enabled by default.
Wireless Device Allows you to enable or disable the internal wireless devices.
Enable
•
•
•
All the options are enabled by default.
Maintenance screen options
Option Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
BIOS Downgrade This controls flashing of the system firmware to previous revisions.
•
Data Wipe This field allows users to erase the data securely from all internal storage devices. The following is list of devices
affected:
•
•
•
•
BIOS Recovery This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user primary hard
drive or an external USB key.
WWAN
GPS (on WWAN Module)
WLAN
Bluetooth
NOTE: For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled or
disabled independently.
WWAN/GPS
WLAN
Bluetooth
Allows BIOS Downgrade (enabled by default)
Internal SATA HDD/SSD
Internal M.2 SATA SDD
Internal M.2 PCIe SSD
Internal eMMC
System setup options 81