Smartcard Module - Dell Latitude 5490 Owner's Manual

3 Connect the LED cable to its connector on the LED board.
4 Install the:
a chassis frame
b WLAN card
c SSD frame
d SSD card
e hard drive
f battery
g base cover
5 Follow the procedure in

SmartCard module

Removing smart card reader board
1 Follow the procedure in
2 Remove the:
a base cover
b battery
c hard drive
d SSD card
e SSD frame
f WLAN card
g WWAN card (optional)
h chassis frame
3 To release the smart card reader board:
a Lift the latch and disconnect the smart card reader board cable from the connector [1].
b Lift the latch and disconnect the touchpad cable from the connector [2].
c Peel the cable from the palmrest [3].
After working inside your computer.
Before working inside your computer.
Removing and installing components 33