Installing Power Connector Port - Dell Latitude 5490 Owner's Manual

c Remove the single M2x3 screw to release the power connector bracket that secures the power connector port to your system
[3].
d Remove the power connector bracket from the system [4].
e Pull the power connector port, and lift it away from the system [5].

Installing power connector port

1 Align the power connector port along the grooves on the slot and push it down.
2 Place the metal bracket on the power connector port.
3 Replace the single (M2x3) screw to secure the power connector bracket to the power connector port.
4 Connect the power connector cable to the connector on the system board.
5 Replace the screw that secures the display cable on the system board.
6 Install the :
a battery
b base cover
7 Follow the procedure in
Chassis frame
Removing the chassis frame
1 Follow the procedure in
2 Remove the:
After working inside your computer.
Before working inside your computer.
Removing and installing components 29