Adjusting The Display And The Warning Tones; Error Messages - Audi TT Coupe 2016 Owner's Manual

Parking systems
in the parking space
c)
fig. 86.
Use the mark-
ings @ to help you estimate t he d istance from
an obstacle. Each marking represents approxi-
mately 3 ft (1 m) . The blue area represents an
extension of the vehicle's outline by approxi-
mately 16 ft (5 meters) to the rear.
.,.. While driving in reverse gear, adjust the steer-
ing wheel angle to fit the parking space using
the orange orientation lines for assistance
c)
.&.
in General information on page 84,
c) (i)
in General information on page 85. @
displays
the rear bumper. Stop the vehicle, at the latest ,
when the red orientation line @ borders a n ob-
ject.
Adjusting the display
and the warning tones
Applies to: vehicles with parkin g system plus
The display and warning tones can be adjusted in
the Infotainment.
.,.. Select in the Infotainment system:
I MENUI
but-
ton > Vehicle > left control button >Driver as-
sistance > Parking aid.
Warning tones
Front volume - volume for the front area
Rear volume - volume for the rear area
Entertainment fader - when the parking syst em
is turned on, the volume of the aud io/video
source is lowered.
The newly selected level is demonstrated briefly
by t he sou nd generator.
(}) Tips
The set tings are automatically stored a nd as-
signed to the remote control key that is in
use.
Error messages
Applies to: vehicles with rear parking system/parking system
plus
Rear parking aid : malfunction! Obstacles not
detected
Front parking aid: malfunction! Obstacles can-
not be detected
86
Parking aid: malfunction! Obstacles cannot be
detected
There is a system malfunction if the LED in the
pg~
button blinks when switching on the system.
If the error is not corrected before you switch off
the ignition, the LED in the pg~ button will blink
the next time you switch on the parking system
by shifting into reverse. As long as the error is ac-
tive, you can display the error messages in the
second t ab of the driver information system.
Parking system plus*
If a sensor or speaker is faulty, the
JM
symbol
will appear in front of/behind the vehicle in the
Infotainment display. If a rear sensor is faulty,
only obstacles t hat a re in areas @ and @ are
s hown
c)
page 83, fig. 80. If a front sensor is
faulty, only obstacles that are in areas © and @
are shown.
Drive to an authorized Audi dealer or authorized
Audi Service Facility immediately to have the
malfunction corrected.