Changing Speed; Overriding The Speed; Preselecting The Speed - Audi TT Coupe 2016 Owner's Manual

The speed is kept constant by modifying engine
power or through an active brake intervention .
A
WARNING
- Always pay attention to the traffic around
you when the cruise control is in operation.
You are always responsible for your speed
and the distance between your vehicle and
other vehicles.
- For reasons of safety, cruise control should
not be used in the city, in stop-and-go traf-
fic, on winding roads and when road condi-
tions are poor (such as ice, fog, gravel,
heavy rain and hydroplaning) - you could
have an accident.
- Switch the cruise control off temporarily
when driving in turning lanes, highway exits
or in construction zones.
- Please note that unconsciously "resting"
your foot on the accelerator pedal prevents
the cruise control from braking. This is due
to the control system being overridden by
the driver's acceleration.
- If a brake system malfunction such as over-
heating occurs when the cruise control sys-
tem is switched on, the braking function in
the system may be switched off. The rest of
the cruise control system functions remain
active as long as the
(1!;(1)~14
(USA models) I
B
(Canada models) indicator light is on.
@
Tips
The brake lights illuminate as soon as the
brakes apply automatically.
Changing speed
Applies to: vehi cles with crui se control system
.. To increase/decrease the speed in xx mph (1
km/h) increments, briefly tap the lever up/
down in the
0 1 0
¢ page 72, fig. 70 direction
to the first level.
.. To increase/decrease the speed in xx mph (10
km/h) increments, briefly
tap
the lever up/
down in the
0 1 0
¢page
72,
fig. 70
direction
to the second level.
Assist
.. To increase or decrease the speed quickly, hold
the lever in the
0
I
0
direction until the de-
sired speed is reached.
Overriding the speed
Applies to: vehicles with cruise cont rol system
You can press the accelerator pedal down to in-
crease your speed, for example if you want to
pass someone. The speed you saved earlier will
resume as soon as you let off of the accelerator
pedal.
However, if you are exceeding the stored speed
by a considerable amount for a long time, the
cruise control system will temporarily switch off.
The
lij;lil~14
(USA models)
!Iii
(Canada models) in-
dicator light in the instrument cluster turns off
and the stored speed is maintained.
Preselecting the speed
Applies to: vehicles with cruise control system
You can pre-select your desired speed while the
vehicle is not moving.
.. Switch on the ignition .
.. Pull the lever into position @ ¢ page 72,
fig. 70.
.. To increase or decrease the speed, tap the lever
in the
0 1 0
direction.
This function makes it possible, for example, to
save the speed you want before driving on the
highway. Once on the expressway, activate the
cruise control by pulling the lever into position
@.
Switching off
Applies to: vehicles with cruise cont rol system
Temporary deactivation
.. Step on the brake pedal, or
.. Press the lever in direction @ (not locked into
place) 9 page 72, fig. 70 .
Switching off completely
.. Press the lever into position @ (clicked into
place), or
.. switch the ignition off.
73