Arm Assembly - ProForm PFSY69520 User Manual

Arm Assembly

9. Open the parts bags labeled "ARM ASSEM-
BLY."
Attach the Rear and Forward Leg Press Uprights
(97, 98) to the Leg Press Base (84) with two 3/8"
x 3 1/4" Bolts (87) and two 3/8" Nylon Locknuts
(50). Note: The Rear Leg Press Upright (97)
has an extra hole in it.
Press two 2" Square Inner Caps (33) into the
Rear and Forward Leg Press Uprights (97, 98).
10. Attach the two Leg Press Attachments (100) to
the Rear and Forward Leg Press Uprights (97,
98) with two 3/8" x 3 1/4" Bolts (87) and two 3/8"
Nylon Jamnuts (63).
11. Attach the Leg Press Plate (85) to the Leg Press
Attachments (100) with two 3/8" x 3 1/4" Bolts
(87), eight 3/8" Washers (55), and two 3/8" Nylon
Jamnuts (63).
Note: All eight of the 3/8" Washers (55) must
be between the Leg Press Attachments (100)
and the welded tube on the Leg Press Plate
(85).
12. Attach a Handle (95) to the Sliding Seat Frame
(74) with two 1/4" x 1 1/2" Bolts (101) and two 1/4"
Nylon Locknuts (25).
Attach the other Handle (95) in the same manner.
9
84
87
10
100
63
11
100
12
74
101
9
33
97
98
50
87
97
100
98
85
87
87
55
55
55
63
95
25
95