Setting Up The Sewing Machine; Installing The Thread Stand; Mounting Position Of The Knee Lifter; Setting The Sewing Machine - JUKI DSC-246 Instruction Manual

4

1. Mounting position of the knee lifter

(Caution)
1
2. Carry the sewing machine with two persons.
(Caution)
3. Do not put protruding articles such as the screwdriver and the
like at the location where the sewing machine is placed.
4

4. Setting the sewing machine

Holding countersunk screw 1 , washer 2 and nut 3 supplied
with the unit, fi x the sewing machine on the table with aligned
with rubber packing 4 at four locations.
5. Securely attach head support rod to the table until it goes no
further.
2
3
– 2 –
The knee lifter should be mounted before the moter
is installed.
Do not hold the handwheel.